Ask beyond one size value
Review the particle-size distribution, measurement basis and filtration behaviour. Do not transfer a CMYK dispersion's particle-size limits to a white grade without checking the actual material and ink system.
WHITE SELF-DISPERSED DISPERSION
AIC-WHITE S701 self-dispersed white pigment dispersion.
A water-based white colourant for formulators developing aqueous inkjet inks. This page brings together the S701 product identity, TDS and information needed to start a sample evaluation; the separate application guide covers print-process qualification.
High hiding powerHigh whitenessStorage-stability focused
PRODUCT IDENTITY
A colourant component, not a finished printer ink.
S701 supplies the white pigment dispersion within a formulation. The final ink still needs its own vehicle, binder and additive selection, followed by qualification in the intended equipment and process.
| Model | AIC-WHITE S701 |
|---|---|
| Product type | Water-based self-dispersed white inkjet pigment dispersion |
| Formulation role | White colourant component for aqueous ink development, not a ready-to-use cartridge or replacement ink |
| Development focus | Hiding power, white appearance and dispersion stability |
| Technical data sheet | View AIC-WHITE S701 TDS PDF |
The TDS describes the dispersion grade. Its properties are not specifications for a finished ink, and do not establish compatibility with a particular printer, resin, film or garment.
TECHNICAL DATA REVIEW
Keep the material data and the ink trial connected.
Review the current S701 data before choosing a sample trial. Record the measurement conditions and agreed acceptance criteria so that the laboratory result and the production requirement can be compared meaningfully.
Compare like with like
Check the stated solids, viscosity, pH, conductivity and surface-tension conditions. For stability data, ask for the storage temperature, duration and any settling or redispersion observations.
Confirm the document scope
A general TDS and a batch COA answer different questions. Confirm the current sample and document availability with AIC; obtain the applicable batch and safety information before production qualification.
APPLICATION GUIDE
Move from the grade to the print process.
For film and powder interactions, garment pretreatment, or liner absorption and converting, use the process-specific evaluation guide. These checks belong to the complete ink and substrate system, rather than the S701 product specification.
TECHNICAL FAQ
Questions about the S701 product grade.
Is S701 a finished white ink?
No. AIC-WHITE S701 is a pigment dispersion used as a colourant component. A finished ink needs formulation and qualification for the intended printhead, fluid path, substrate and process.
Can I use CMYK specifications for this white grade?
Do not assume the same limits apply. Review the S701 TDS and its measurement conditions, then agree on white-grade acceptance criteria for your formulation.
What information helps AIC recommend a sample?
Share your application, printhead and fluid system, target substrate, binder or vehicle, required ink properties and trial quantity. Confirm current sample and document availability with AIC.
AIC-WHITE S701 ENQUIRY
Discuss the right S701 sample trial.
Tell us which white-ink project you are developing and what you need to qualify. Start with the product data, then agree on the sample evaluation scope.
Request AIC-WHITE S701 data →