Technical data sheet
View the grade identity, technical targets and handling information.
Open AIC-Black 9003 TDS →PHOSPHATE SERIES · C.I. PIGMENT BLACK 7
AIC-Black 9003
Phosphate PBk7 pigment dispersion
AIC-Black 9003 is a Phosphate Series self-dispersed aqueous PBk7 pigment dispersion with 15 wt% pigment solids. It supplies the black colourant component for water-based inkjet ink development.
GRADE OVERVIEW
A phosphate-functional black for your ink formulation.
Build a black-ink trial around the intended print process, ink vehicle and substrate. Black 9003 gives formulators a PBk7 option within the Phosphate Series, with a model-specific particle-size report and matching technical documents to support the initial evaluation.
- Model
- AIC-Black 9003
- Colour index
- C.I. Pigment Black 7 / PBk7
- Series
- Phosphate Series
- Pigment solids
- 15 wt%
- Formulation role
- Concentrated black colourant for aqueous inkjet ink formulation
TECHNICAL PROFILE
Product targets at a glance.
Published product-level targets are listed below. The original particle-size report follows as a separate sample result.
| Property | Value or target |
|---|---|
| Nominal pigment solids | 15 wt% |
| Particle size D50 | ≤140 nm |
| Viscosity | ≤3 mPa·s |
| Electrical conductivity | ≤2,000 µS/cm |
| Surface tension | 40–80 mN/m |
| pH | 7.5–9.5 |
| Accelerated aging | 60 °C for 7 days |
| Surface tension, viscosity and conductivity changes after aging | ≤10% each |
Read the current model TDS for test-method references and data interpretation. Request the applicable batch COA for supply qualification.
SUPPLIED PARTICLE-SIZE REPORT
The reported Black 9003 distribution.
The model-specific report records the following percentile diameters, converted from micrometres to nanometres.
- D10
- 98 nm
- D50
- 126 nm
- D90
- 170 nm
- D97
- 196 nm
These percentile diameters describe the supplied report example. Use the measurement basis and current batch COA when agreeing acceptance criteria for your formulation.
Open original report image ↗
FORMULATION & GRADE SELECTION
Evaluate the black channel in the complete ink.
Record optical density and black tone on the intended substrate at the selected ink laydown. Read those observations alongside drying, rub resistance and the behaviour of the complete binder system.
The published evaluation routes are DTG, roll-to-roll textile, desktop pigment ink, corrugated digital printing and latex ink. Select the relevant route first, then check filtration, storage, circulation and jetting in the finished formulation.
Both Black 9003 and Black 0058 use PBk7. Black 9003 belongs to the Phosphate Series; Black 0058 belongs to the Carboxylic Series. Compare surface chemistry, the current technical data and formulation response when choosing between them.
TECHNICAL DOCUMENTS
Review this model and the applicable batch.
Safety data sheet
Read the model-specific safety and handling information, with PDF download.
Open AIC-Black 9003 SDS →Current batch COA
Request results for the batch used in your sample or supply programme.
Request current batch data →ORDERING INFORMATION
Samples, Packaging & Delivery
- Sample size
- 500 mL–1 Lper sample bottle
- Standard packaging
- 25 kg / 200 kgper containeror1,000 kgper IBC
- Delivery to a port in China
- Within 3 daysafter the order is formally signed, to the designated port in China.
AIC-BLACK 9003 ENQUIRY
Plan your black-ink formulation trial.
Share your print process, printhead, substrate, ink vehicle and trial quantity so we can prepare the relevant technical data and sample information.
Discuss AIC-Black 9003