Technical data sheet
View the grade identity, technical targets and handling information.
Open AIC-Cyan HC-7533 TDS →PHOSPHATE SERIES · C.I. PIGMENT BLUE 15:3
AIC-Cyan HC-7533
Phosphate PB15:3 pigment dispersion
AIC-Cyan HC-7533 is a Phosphate Series self-dispersed aqueous PB15:3 pigment dispersion with 15 wt% pigment solids. It supplies a cyan colourant for water-based inkjet ink development.
GRADE OVERVIEW
A phosphate-functional cyan for your CMYK trial.
HC-7533 offers a PB15:3 cyan option within the Phosphate Series. Assess its colour response with the magenta, yellow and black selected for the same formulation, and connect the colour results to the intended substrate and printing conditions.
- Model
- AIC-Cyan HC-7533
- Colour index
- C.I. Pigment Blue 15:3 / PB15:3
- Series
- Phosphate Series
- Pigment solids
- 15 wt%
- Formulation role
- Concentrated cyan colourant for aqueous inkjet ink formulation
TECHNICAL PROFILE
Product targets at a glance.
Published product-level targets are listed below. The original particle-size report follows as a separate sample result.
| Property | Value or target |
|---|---|
| Nominal pigment solids | 15 wt% |
| Particle size D50 | ≤150 nm |
| Viscosity | ≤3 mPa·s |
| Electrical conductivity | ≤2,000 µS/cm |
| Surface tension | 40–80 mN/m |
| pH | 7.5–9.5 |
| Accelerated aging | 60 °C for 7 days |
| Surface tension, viscosity and conductivity changes after aging | ≤10% each |
Read the current model TDS for test-method references and data interpretation. Request the applicable batch COA for supply qualification.
SUPPLIED PARTICLE-SIZE REPORT
The reported Cyan HC-7533 distribution.
The model-specific report records the following percentile diameters, converted from micrometres to nanometres.
- D10
- 117 nm
- D50
- 157 nm
- D90
- 208 nm
- D97
- 239 nm
The supplied report records D50 at 157 nm; the TDS lists an indicative D50 target of ≤150 nm. The sample result and grade target are shown separately here. Use comparable measurement conditions and current batch data for qualification.
Open original report image ↗
FORMULATION & GRADE SELECTION
Connect cyan colour development to ink behaviour.
Start with a cyan drawdown or print trial using the intended binder and humectant package. Record the substrate, ink laydown and drying conditions when comparing the cyan tone and density with your target.
The published evaluation routes are DTG, roll-to-roll textile, corrugated digital printing and latex ink. Review filtration, storage, circulation and jetting alongside the finished ink's viscosity, conductivity, pH and surface tension.
HC-7533 and Cyan 6900 both use PB15:3 at 15 wt% nominal pigment solids. HC-7533 belongs to the Phosphate Series; Cyan 6900 belongs to the Carboxylic Series. Use the chemistry platform and complete-formulation trial to guide selection alongside particle-size data.
TECHNICAL DOCUMENTS
Review this model and the applicable batch.
Safety data sheet
Read the model-specific safety and handling information, with PDF download.
Open AIC-Cyan HC-7533 SDS →Current batch COA
Request results for the batch used in your sample or supply programme.
Request current batch data →ORDERING INFORMATION
Samples, Packaging & Delivery
- Sample size
- 500 mL–1 Lper sample bottle
- Standard packaging
- 25 kg / 200 kgper containeror1,000 kgper IBC
- Delivery to a port in China
- Within 3 daysafter the order is formally signed, to the designated port in China.
AIC-CYAN HC-7533 ENQUIRY
Plan your cyan-ink formulation trial.
Share your print process, printhead, substrate, ink vehicle and trial quantity so we can prepare the relevant technical data and sample information.
Discuss AIC-Cyan HC-7533