Technical data sheet
View the grade identity, technical targets and handling information.
Open AIC-Magenta Red HC-1102B TDS →PHOSPHATE SERIES · C.I. PIGMENT RED 122
AIC-Magenta Red HC-1102B
Phosphate PR122 pigment dispersion
AIC-Magenta Red HC-1102B is a Phosphate Series self-dispersed aqueous PR122 pigment dispersion with 15 wt% pigment solids. It provides the magenta colourant component for water-based inkjet formulations.
GRADE OVERVIEW
PR122 within the Phosphate Series.
Use HC-1102B when evaluating a phosphate-functional PR122 route for the magenta channel. Review colour development with the cyan, yellow and black selected for the same ink system, so that single-colour results can be related to the intended CMYK set.
- Model
- AIC-Magenta Red HC-1102B
- Colour index
- C.I. Pigment Red 122 / PR122
- Series
- Phosphate Series
- Pigment solids
- 15 wt%
- Formulation role
- Concentrated magenta colourant for aqueous inkjet ink formulation
TECHNICAL PROFILE
Product targets at a glance.
Published product-level targets are listed below. The original particle-size report follows as a separate sample result.
| Property | Value or target |
|---|---|
| Nominal pigment solids | 15 wt% |
| Particle size D50 | ≤150 nm |
| Viscosity | ≤3 mPa·s |
| Electrical conductivity | ≤2,000 µS/cm |
| Surface tension | 40–80 mN/m |
| pH | 7.5–9.5 |
| Accelerated aging | 60 °C for 7 days |
| Surface tension, viscosity and conductivity changes after aging | ≤10% each |
Read the current model TDS for test-method references and data interpretation. Request the applicable batch COA for supply qualification.
SUPPLIED PARTICLE-SIZE REPORT
The reported Magenta Red HC-1102B distribution.
The model-specific report records the following percentile diameters, converted from micrometres to nanometres.
- D10
- 100 nm
- D50
- 133 nm
- D90
- 184 nm
- D97
- 217 nm
These percentile diameters describe the supplied report example. Use the measurement basis and current batch COA when agreeing acceptance criteria for your formulation.
Open original report image ↗
FORMULATION & GRADE SELECTION
Develop the magenta channel against a defined target.
Prepare a drawdown or print trial on the intended substrate and compare the magenta tone and density with the agreed colour target. Record ink laydown, drying conditions and the binder system used.
The published evaluation routes are DTG, roll-to-roll textile, corrugated digital printing and latex ink. Combine colour evaluation with viscosity, conductivity, pH, surface tension, filtration and storage checks in the complete ink.
HC-1102B and AIC-Magenta Red 1015 both use PR122 at 15 wt% nominal pigment solids. Their published surface-chemistry platforms differ: Phosphate for HC-1102B and Carboxylic for 1015. Evaluate each with the intended ink vehicle before selecting a grade.
TECHNICAL DOCUMENTS
Review this model and the applicable batch.
Safety data sheet
Read the model-specific safety and handling information, with PDF download.
Open AIC-Magenta Red HC-1102B SDS →Current batch COA
Request results for the batch used in your sample or supply programme.
Request current batch data →ORDERING INFORMATION
Samples, Packaging & Delivery
- Sample size
- 500 mL–1 Lper sample bottle
- Standard packaging
- 25 kg / 200 kgper containeror1,000 kgper IBC
- Delivery to a port in China
- Within 3 daysafter the order is formally signed, to the designated port in China.
AIC-MAGENTA RED HC-1102B ENQUIRY
Plan your magenta-ink formulation trial.
Share your print process, printhead, substrate, ink vehicle and trial quantity so we can prepare the relevant technical data and sample information.
Discuss AIC-Magenta Red HC-1102B